Final Touch-Ups. Painting the Name

Last day in the boatyard. Our sufferings will soon be over. The adventures shall begin.

(By ‘sufferings‘ I mean living in a place full of dirt and toxic dust where people are constantly sanding and painting their boats; with one toilet and one shower for all, men and women; no beach near by, nothing much to do; constantly working on the boat, mosquitoes and noseeums every evening; no AC, etc.)

Tomorrow is the big splash, Fata Morgana will finally go back to her natural habitat: the sea. Today, we finished painting the bottom and some final touch-ups.

Maya Painting

Maya Painting

Still, a boat will always look unfinished until you put the name on. Also, that is the most artistic and heroic of all jobs done on the boat (in this case, by me, of course). I am totally being sarcastic here. First, you spend months choosing a font and a design for the boat’s name. Next, you measure and decide how big will the letters be, what color, and where to place them. Usually, you place them on both sides of the hull(s), port and starboard, and on the back of the boat, where the name of the home port has to appear as well. Next, you go to a vinyl shop and you order your signs: big stickers which you stick to the boat.

This is one way of doing it. The guy in the vinyl shop told us it would cost us somewhere between a few hundred and over a thousand dollars, depending on the size and color of the letters. More than a thousand dollars for a name?!!!

Plan B

We went and bought special boat paint, couple of brushes and a clear-coat spray (all for under $80.00, black paint for the name, red and blue for the stripes on the sides) and I painted the name and the stripes myself. Took me a few hours for the two sides.

Here is the whole process of how you can (and should) do that yourself with pictures and all.

1. Design your letters or just choose a font and print them as big as they have to be on paper. I designed mine combining two fonts. I started with the letter A, because there are four A-s in Fata Morgana. Next, I based the letters O and G on the A and used the A again to create the T and the R. The capital F and M were hardest to come up with. I drew them with a pen on paper and I cut them out one by one.

Step 1: Design, Draw, Cut.

Step 1: Design, Draw, Cut.

2. Next, I measured the place where the name will appear on the hull and  Ivo sanded it lightly to prep it. Then, I drew with a pencil contours around the paper letters on the hulls.

Step 2: Measure, Draw contours.

Step 2: Measure, Draw contours.

3.Then, with a tiny brush, I colored the letters. I used tape around all straight edges, but mostly I just held my breath and, with as steady hand as possible, just painted directly on the boat.

Step 3: Tape, Paint

Step 3: Tape

Step 4: Paint

Step 4: Paint

Step 4: Paint

Step 4.5: Ponder

Step 5: Step back and admire your work

Step 5: Step back and admire your work

Note: Have you noticed the red and blue stripes on the boat? Same technique. I used tape to make them as straight as possible and I painted them on.

Also, if you wonder about the name Fata Morgana, please read on here.


About lifenomadik

We are a family aboard a boat in search of freedom and adventure.
Tagged , , , , , , , , , . Bookmark the permalink.

7 Responses to Final Touch-Ups. Painting the Name

  1. Pascal P says:

    You’re awesome!!!


  2. Brian and Joyce says:

    WOW!!!! What a great job. Looks really good. Good luck for tomorrow and have a drink on us.

  3. Very nice. Thanks for the valuable info. Best wishes on Fata Morgan’s launch.

  4. capnrehab says:

    Wow! That looks great. I hope I can do as nice a job when it comes time for that on my boat. Nicely done!

  5. elisabeth says:

    Your boat looks great. I miss you guys. Bisous

Вашият коментар

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *

Follow Me